Watson-marlow Bredel 265 User Manual download pdf (Page 38)

MAINTENANCE

8.2 Maintenance and periodic inspections

The following checklist shows the maintenance and

periodic inspections that need to be carried out on the

hose pump to guarantee an optimal safety, operation

and life of the pump.

WARNING

If the cover is removed when the pump

hose is still in the pumphead, the compres-

sion forces on the pump hose may cause

deformation of the pump housing. The

hose needs to be safely removed before

the cover can be replaced.

Normally the compression forces are par-

tially compensated by the cover.

The following steps must be taken:

1 Remove pump hose from the

pump

2 Isolate the motor from the electrical

supply.

3 Do not remove the cover if the

pump hose is still in the pump.

Prior to installation, always check the con-

dition of the supplied parts. Do not install

damaged parts. In case of doubt, contact

your Bredel representative.

It is also necessary to carry out periodic

inspection of the gearbox and the electric

motor. Consult their separate manuals to

guarantee an optimal safety, operation and

life of the gearbox and the electric motor.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 91 92

No comments

Watson-marlow Bredel 265 User Manual Page 38