Watson-marlow Bredel 265 User Manual download pdf (Page 48)

MAINTENANCE

8.7 Exchanging replacement parts

8.7.1 General

8.7.2 Replacing pressing shoes

1. Jog the motor until the pressing shoe (B) is

positioned in view of the inspection window (A).

2. Isolate the pump from the electrical supply.

3. Place a tray (A) under the drain plug (B) in the

bottom of the pumphead. Remove the drain

plug. Drain as much Bredel Genuine Hose

Lubricant until the level has lowered just below

the inspection window (D). Check that the

sealing ring (C) is not damaged and replace it if

necessary. Position the drain plug and tighten it

firmly.

CAUTION

Items may be heavy. For all weight and

torque adjustments for replacement proce-

dures under this section, please see the

technical information in chapter 11.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 91 92

No comments

Watson-marlow Bredel 265 User Manual Page 48