Watson-marlow Bredel 265 User Manual download pdf (Page 62)

MAINTENANCE

6. Fit the plug with the inductive sensor (A)

together with sealing ring (B) on the pump

housing.

7. Refill the pump housing to the proper level with

Bredel lubricant.

8. Connect the sensor electrically via the 2 meter

long PVC cable (3 x 0,34 mm

). Refer to

connection scheme below.

8.9.4 Installing the cover lifting device (CLD) on a

horizontal configuration

1. Define the position.

The cover lifting device (CLD) must be mounted

on the frame on the opposite position of the

motor side. Refer to the illustration.

2. Fit the bracket.

Fit the bracket (A) with the supplied fasteners

(B) on the frame of the unit.

The torque on the bolts should be 210 Nm.

3. Insert the lifting pole.

A B

pnp

Specifications

Voltage 10 ... 30 V DC

Current Max. 150 mA

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 91 92

No comments

Watson-marlow Bredel 265 User Manual Page 62