Watson-marlow Bredel 265 User Manual download pdf (Page 40)

MAINTENANCE

8.3 Cleaning the pump hose

The inside of the pump hose can be easily cleaned by

rinsing the pump with clean water. If a cleaning fluid is

added to the water, check if the hose liner material is

resistant to it. Also check if the pump hose can resist

the cleaning temperature. Special cleaning balls are

also available. Contact your Bredel representative for

more details.

8.4 Changing lubricant

1. Place a tray (A) under the drain plug in the

bottom of the pump. Remove the drain plug (B).

Catch the lubricant from the pump housing in

the tray. Check that the sealing ring (C) is not

damaged and replace it if necessary. Position

the drain plug and tighten it firmly.

11 Replacing wear ring. If necessary. See § 8.7.3.

12 Replacing pressing

shoes.

Wear on the running sur-

face.

See § 8.7.2.

13 Replacing bearings. If necessary. See § 8.7.4.

14 Maintenance and peri-

odic inspection of the

gearbox and motor.

Before start-up of the

pump and on a sched-

uled interval during oper-

ation.

Check the manuals of

the gearbox and the

motor.

Point Action To be carried out Remark

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 91 92

No comments

Watson-marlow Bredel 265 User Manual Page 40